Monday 23 July 2012

Olympic Record Book & UTEE Pendants

If you saw the fabulous record book & Pendants Katrina posted on Face book and have been waiting patiently for the full instructions here they are...finally!

I used -
* Bare Chipboard Album Tabbed
* Eco Green Acrylic Paints - Green patina, Gold, silver and bronze
* Vintedge Collection Pack
* Vintedge Paper Twine 15yds
* Craftime Britannia Ribbons
* Exquisite Pigment Ink - Lapis
* Craftime Britannia Laser Mesh Sheets

How I made my book -
1. Use the fantastic paint to paint your book. I used the green patina for the covers and the back page then used the gold, silver and bronze for each of the tabs. Leave to dry,
2. Trim the papers down to fit your pages. If you like the inky look, ink around the edges with the Lapis ink and the to add the dotty pattern apply ink with a sponge through the mesh sheets in a random way.
3. For the front cover I used a image from the collage sheet paper from the collection pack along with the word London. I cut the other words with my Cricut but you could use any letters you like.
4. On the back page I used an off cut of paper to make a pocket to add any keepsakes. Put you book together and add the ribbons to the book rings.





 
So now you can make it your own, my plan is to add the medals won as they happen to the appropriate page and use the other pages to add memories and journalling along the way. But you could add pictures and journalling of how you celebrated the year the Olympics came to London.
 
 
UTEE Pendants


Before we start just a bit about the difference between normal embossing powder and UTEE (Ultra thick embossing enamel). Embossing powder, which is very fine granules, like powder is usually used on top of a stamped image, although there are lots of other things you can do with them. The granules are fine enough to stick to the ink and keep the fine stamped lines of the image. They are then heated with a heat gun and melt into a raised line. With UTEE the first thing you will notice is it has much larger granules, like sugar. So not good for using over a stamped image but great for melting and pouring into shapes and covering large areas. Again there are lots of ways to use it and things to make with it. If you have any questions just ask but do have a play with them, they are such good fun. Just watch your fingers as they get very very hot!!

So here is how I use UTEE in my melt pot. If you don't have a melt pot you can still use UTEE. You will need a heat gun, a hair drier won't do the job as it blows air and will just blow your powder all over your table and also its just not hot enough. You can hold the little pie trays with a wooden peg, the tray gets very hot, and use your heat gun to heat from the bottom till the powder melts. If you have a melt pot though get it out, heat it up to UTEE -

I used -
* Melt Art Texture Treads Mod Circles
* Imagination Crafts Magi Boss Chunky Mother of Pearl
* Cosmic Shimmer Malachite Fire 20ml UTEE
* Metal pie trays, the small ones
* Wooden cocktail stick
* Wooden peg
* Melt pot or heat gun
* Mould of some sort like a small cookie cutter or as I used the plastic inside of a roll of tape!
1. Put the powder into a little pie dish
2. Place the pie dish into the melt pot. You can just pour the powder into the melt pot but then you have to clean it out and you can only melt one powder at a time. This way you can get 3 pie dishes in, just. Pop the lid on and wait till it melts.
3. In the mean time decide where you wish to pour on the Texture tread and place your mould over the area.
4. Once the powder is molten carefully pop a wooden peg onto the dish as a handle and pour the molten powder into the mould to cover the bottom.
5. As quickly as you can put a cocktail stick into the top of your mould if you want to use it as a pendant and leave to cool.
6. Remove from the texture tread and push out of your mould. Then make some more!!
7. If you don't like the way it turned out just throw it back in to the tray and re melt it and pour it again, the same with any little bits you get, just throw them back in the dish. Once you have finished leave all the dishes to cool, stack them on top of each other and store. When you want to play with them again jut pop the dish with the solid UTEE onto the hot melt pot and off you go again. You can of course mix your powders and molten powder together if you like.

The examples were all made this way, the top 3 were made with the mould, the one on the bottom in the middle is a piece of sequin waste punched out with a circle punch and put at the bottom of the mould then the mother of pearl poured over the top. The gold and blue ones at the bottom were just poured free hand straight onto the texture tread.
I know the texture treads are an investment but other ideas of how to use them coming up!

 

No comments:

Post a Comment